BI-FOLD SHOWER DOORS
click here

THE DOUBLE SWIVEL STRAP ROLLER. Used for our exclusive Hi Tech Bi-Fold Shower Door. You get full opening of the shower area and full closure and there is nothing on the floor. It sounds too good to be true. For a 60" shower door, the wall space required when folded is 12" on each side of the centerline of the shower door. Wilson Glass exclusive. Yes, we should be rich and famous any minute. These are in stock. (Single Swivel Rollers are available for special spplications.)

THE DIRECT ROLLER
click here

Two sizes of Rollers.
This roller is ideal for the Wilson Shower Sliding Door System

The direct Rollers works well with Ceiling Mount Hangers and our half round floor track. We DO have a top U-channel now for glass door and bottom rollers.

The Mortise Roller
Click Here

Mortised into the top of the door.

Two versions - MRWS with safety pin and MRNS without safety pin. Both are in stock.
We have several hangers for different thickness of doors.
The Rollers have height adjustment for easier installation

STRAP ROLLERS for WOOD DOORS
Click Here

This roller bolts through the face of the door. If the door has styles and rails, the the strap will probably be mounted centered on the style.
The choice between Strap and Mortise is mostly esthetics and door thickness.
We have several hangers and bolt sizes for doors up to 1 3/4" thick.
Thicker doors would need the ceiling Mount Hangers.
There are two choices of fastener for the other side of door. (Flush and Surface Mount both included)

Two versions - with safety pin and without safety pin. Both are in stock.

STRAP ROLLERS FOR GLASS
Click Here

Shown with 1/2" Starphire sandblasted glass. NEW!! Now, in Stock with safety pin and without. For Glass doors we recommend using the safety pin if possible. As opposed to CRL brand which are not available with safety pin.
There is 1/2" between glass and wall. We have hangers that will increase or decrease this distance.
Note that Starphire Sandblasted also known as Low Iron Satin has come way down in price due to the recession. Now's the time to buy before prices go back up.

CONTOUR ROLLER
click here

Similar to the strap roller but no visible bolts or caps from the outside. The roller can be mounted with the stainless body directly against the glass or wood, which prevents dust accumulation, or it can be mounted using supplied standoffs. From 3/8" to 1 3/4" Door are possible.
Heavy duty solid stainless.

Double Strap Roller
click here

for large doors up to 440 lbs in either WOOD or GLASS.
The two rollers are on a pivot so the weight of door is automatically equalized between rollers. This is because, If you used three single rollers chances are the middle roller will be holding all the weight or none of the weight.
We have a variety of hangers for different sized doors. We can even swap out the rollers with a version that has a smaller spacer to get the gaps correct for your application.

This roller is 5" wide. If you have double doors, make sure the rollers don't hit when the two doors are closed. In other words your style should probably be larger than 5" or mount the roller off centerline of the style.

Double Mortise Roller
click here

For large wood doors up to 440 lbs.
These Rollers are on a pivot like the double strap, to keep the weight equally divided between both rollers.
The rollers are 5" wide.
We have several hangers and spacers to get the dimensions right for your door thickness and desired gap to the wall.

Round Bar Roller for Glass
click here.

Unique look. Wouldn't everyone agree that a Round bar is more pleasing than the flat bar of the Strap Roller.
For Glass Only. We have rollers with safety pin and without safety pin IN STOCK.

LIST OF PARTS
click here

We try to stock all necessary parts, including ceiling mount hangers. Most parts are in stock. Actually we have many more parts than are on the web site right now.